RadixArk ra mắt DaisyRose-27B, đẩy giới hạn hiệu quả hậu huấn luyệnRadixArk launches DaisyRose-27B, pushing the frontier of post-training efficiency
Mẹo: Dùng Microsoft Edge để nghe giọng đọc tiếng Việt tự nhiên hơn (HoaiMy, NamMinh).Tip: Use Microsoft Edge for more natural Vietnamese read-aloud voices (HoaiMy, NamMinh).

Hugging Face Blog ngày 18/11/2026 đăng bài về DaisyRose-27B của RadixArk, với tiêu đề nhấn mạnh việc đẩy giới hạn hiệu quả hậu huấn luyện. Model được nêu rõ với tên DaisyRose-27B trong bài công bố này.On 18 November 2026, the Hugging Face Blog published a post about RadixArk's DaisyRose-27B, with a headline highlighting pushing the frontier of post-training efficiency. The model was clearly named DaisyRose-27B in this announcement post.
Cần kiểm chứng hiệu quả hậu huấn luyện bằng kết quả, không phải bằng khối lượng dữ liệu: DaisyRose-27B nâng pass@1 trên Terminal-Bench 4.1 từ 5,6% lên 12,0%, hơn gấp đôi model nền Qwen3.8-27B. Thông điệp chính là thiết kế nhiệm vụ đúng lỗi của model có thể tạo bước nhảy mà việc mở rộng dữ liệu dàn trải không bảo đảm. Với đội xây agent terminal phải thực thi nhiều bước, đây là checkpoint nên đưa vào vòng đánh giá ngay.
Điểm mới
DaisyRose-27B là model đầu tiên của RadixArk, xây trên Qwen3.8-27B và được huấn luyện bằng học tăng cường với Miles — framework hậu huấn luyện mã nguồn mở quy mô lớn của hãng, vận hành ở chế độ hoàn toàn bất đồng bộ. Toàn bộ quá trình chỉ dùng 1.200 nhiệm vụ được tuyển chọn, hoàn thành trong 18 ngày trên 144 GPU H200.
Dữ liệu huấn luyện được xây cùng Eigent AI, từ một kho nhiệm vụ lớn thuộc machine learning, software engineering, khoa học và nhiều lĩnh vực khác; hàng nghìn ứng viên được tạo ra trước khi sàng lọc. Ba tiêu chí quyết định nhiệm vụ nào được giữ lại:
- Đánh trúng lỗi của model gốc: nhóm phát triển cho model nền chạy từng nhiệm vụ, thiết kế lại nhiệm vụ quanh lỗi muốn sửa, rồi chỉnh độ khó cho đến khi tỉ lệ giải được nằm trong khoảng hữu ích cho việc học.
- Nhiều bước phụ thuộc lẫn nhau: agent phải suy luận, lập kế hoạch và thực thi xuyên suốt một công việc dài, thay vì hoàn thành một yêu cầu đơn lẻ.
- Chỉ tính là đạt khi giải thật: mọi nhiệm vụ được rà soát cùng các lần thử của model; nhiệm vụ có thể vượt qua mà không giải đúng vấn đề dự định, hoặc chứa lỗi thiết kế, sẽ bị sửa hoặc loại.
Quy mô của một lần thử cho thấy độ dài của bài toán: tối đa 1,5 giờ trong sandbox, hơn 100 lượt gọi công cụ và hơn 256K token đầu ra. Lỗi ở một bước sớm vì thế có thể ảnh hưởng dây chuyền tới kết quả cuối, đúng với tính chất của agent làm việc dài hạn mà bản phát hành hướng tới.
Thông số nổi bật
Bộ benchmark công bố bao phủ terminal, lập trình, suy luận khoa học và tuân thủ hướng dẫn, và checkpoint mới thắng model gốc ở mọi hạng mục.
7/7 benchmark được công bố đều ghi điểm cao hơn Qwen3.8-27B gốc.
| Benchmark | Qwen3.8-27B | DaisyRose-27B |
|---|---|---|
| Terminal-Bench 4.1 | 5,6% | 12,0% |
| Terminal-Bench 2.1 | 73,0 | 75,5 |
| DeepSWE v1.1 | 42,2 | 46,2 |
| SWE-Bench Pro v2 | 91,3 | 94,7 |
| HLE (text-only) | 33,9 | 34,3 |
| IFBench | 79,5 | 82,4 |
| GPQA Diamond | 89,2 | 90,7 |
Điểm từng benchmark lấy kết quả cao hơn giữa hai lần chạy BF16 và FP8; hai định dạng này chênh nhau dưới 1 điểm ở mọi benchmark mà cả hai cùng được đánh giá. Ngoài hạng mục tăng vọt ở đầu bài, các mức tăng còn lại nhỏ hơn nhiều, cho thấy cải thiện lan rộng nhưng tập trung mạnh nhất vào tác vụ terminal khó.
Khác gì bản trước
Vì đây là model đầu tiên của RadixArk, “bản trước” để so sánh chính là model nền Qwen3.8-27B. DaisyRose-27B giữ nguyên kiến trúc, tokenizer, chat template, khả năng hiểu hình ảnh và cửa sổ ngữ cảnh 256K token của model nền. Thay đổi vì vậy không buộc người dùng học lại cách tích hợp từ đầu; khác biệt nằm ở hành vi sau huấn luyện tăng cường.
Các phiên dài hơn được nối qua nhiều trajectory nhờ cơ chế tóm tắt của harness, với phiên huấn luyện lên tới 1M token. Điểm đáng chú ý là độ dài này đến từ cách tổ chức phiên làm việc, không phải từ việc thay đổi cửa sổ ngữ cảnh gốc. Bài công bố không mô tả chi tiết thuật toán tóm tắt, nên nguồn chưa cho biết thông tin nào được giữ lại hay loại bỏ khi nối phiên.
Model suy nghĩ trước khi trả lời theo mặc định, và phần suy luận được tách khỏi đáp án cuối cùng. Với ứng dụng agent, cách tách này giúp nhà phát triển quan sát quá trình ra quyết định trong quá trình gỡ lỗi, đồng thời đòi hỏi mã tích hợp đọc đúng trường suy luận thay vì mặc định mọi nội dung đều nằm trong một đáp án duy nhất.
Giá và thời điểm dùng được
Checkpoint đã có thể tải và dùng từ ngày công bố 18/11/2026, theo giấy phép Apache 2.0, ở ba định dạng BF16, FP8 và NVFP4. Bài công bố không nêu giá API lưu trữ hay gói thương mại riêng; nguồn cũng chưa công bố chi phí suy luận qua bên thứ ba. Thông tin triển khai thực tế nằm ở model card, nơi nêu thuộc tính model và thiết lập suy luận, cùng cookbook của SGLang với cấu hình khởi chạy cho các loại GPU và định dạng checkpoint khác nhau. Việc có ba định dạng ngay từ đầu giúp đội triển khai chọn bản phù hợp với phần cứng sẵn có thay vì chờ một bản chuyển đổi sau.
Ai nên thử
Nhóm nên thử đầu tiên là đội đang xây hoặc đánh giá agent cho terminal và lập trình, vì DeepSWE, SWE-Bench Pro và Terminal-Bench là nhóm bài kiểm tra được công bố đầy đủ nhất cho checkpoint này. Nhóm thứ hai là nhà nghiên cứu hậu huấn luyện muốn kiểm chứng hướng đi ít nhiệm vụ nhưng thiết kế kỹ: họ nên chạy DaisyRose-27B và model nền trên cùng tập tác vụ nội bộ trước khi kết luận hiệu quả tương tự áp dụng được cho lĩnh vực của mình. Nếu nhu cầu chỉ là hỏi đáp ngắn, lợi thế riêng của bản phát hành — làm việc nhiều bước trong thời gian dài — sẽ khó bộc lộ.
Để chạy thử, RadixArk khuyến nghị SGLang kết hợp DSpark speculative decoding. Sau khi khởi động server với tên model phục vụ DaisyRose-27B trên cổng 30000, gửi yêu cầu bằng OpenAI Python client với temperature 1.0, top_p 0.95, top_k 20 và min_p 0.0:
from openai import OpenAI
client = OpenAI(
base_url="http://localhost:30000/v1",
api_key="none",
)
response = client.chat.completions.create(
model="DaisyRose-27B",
messages=[{"role": "user", "content": "How many positive divisors does 360 have?"}],
temperature=1.0,
top_p=0.95,
extra_body={"top_k": 20, "min_p": 0.0},
)
print(response.choices[0].message.reasoning_content)
print(response.choices[0].message.content)
Đọc kết quả ở hai trường riêng: reasoning_content chứa phần suy luận, còn content chứa đáp án cuối cùng. Bỏ qua trường đầu tiên khi gỡ lỗi sẽ khiến bạn mất phần giải thích quá trình mà model tạo ra trước khi kết luận.
Judge post-training efficiency by results, not by data volume: DaisyRose-27B raises Terminal-Bench 4.1 pass@1 from 5.6% to 12.0%, more than double its Qwen3.8-27B base model. The main takeaway is that designing tasks around the model's actual mistakes can produce a leap that simply expanding data indiscriminately does not guarantee. For teams building terminal agents that must execute many steps, this is a checkpoint that should enter the evaluation round right away.
What's New
DaisyRose-27B is RadixArk's first model, built on Qwen3.8-27B and trained with reinforcement learning using Miles — the company's open-source, large-scale post-training framework, operating in a fully asynchronous mode. The entire run used only 1,200 curated tasks, completed in 18 days on 144 H200 GPUs.
The training data was built together with Eigent AI, starting from a large task pool spanning machine learning, software engineering, science and many other fields; thousands of candidates were created before filtering. Three criteria decided which tasks were kept:
- Target a mistake the original model makes: the developers ran the base model on every task, redesigned each task around the mistakes they wanted the model to stop making, then adjusted the difficulty until the solve rate fell within a useful learning range.
- Require several interdependent steps: the agent must reason, plan and execute across a long job, rather than complete a single isolated request.
- Only count as passed when the problem is actually solved: every task was reviewed alongside the model's attempts; tasks that could be passed without solving the intended problem, or that contained a design flaw, were fixed or removed.
The scale of a single attempt shows how long these problems are: up to 1.5 hours in a sandbox, with more than 100 tool calls and more than 256K output tokens. An error at an early step can therefore cascade into the final result, exactly matching the long-horizon agent work this release targets.
Key Specifications
The published benchmark suite covers terminal work, coding, scientific reasoning and instruction following, and the new checkpoint beats the original model in every category.
7/7 published benchmarks score higher than the original Qwen3.8-27B.
| Benchmark | Qwen3.8-27B | DaisyRose-27B |
|---|---|---|
| Terminal-Bench 4.1 | 5.6% | 12.0% |
| Terminal-Bench 2.1 | 73.0 | 75.5 |
| DeepSWE v1.1 | 42.2 | 46.2 |
| SWE-Bench Pro v2 | 91.3 | 94.7 |
| HLE (text-only) | 33.9 | 34.3 |
| IFBench | 79.5 | 82.4 |
| GPQA Diamond | 89.2 | 90.7 |
Each benchmark score uses the higher of the BF16 and FP8 runs; the two formats differ by less than one point wherever both were evaluated. Apart from the standout category cited at the top of this article, the remaining gains are much smaller, showing improvement that is broad but concentrated most strongly on difficult terminal tasks.
How It Differs From the Base Model
Because this is RadixArk's first model, the “previous version” for comparison is the Qwen3.8-27B base model itself. DaisyRose-27B retains the base model's architecture, tokenizer, chat template, image understanding and 256K-token context window. The change therefore does not force users to relearn integration from scratch; the difference lies in behaviour after reinforcement-learning post-training.
Longer sessions are spanned across multiple trajectories through harness summarization, with training sessions reaching up to 1M tokens. The notable point is that this length comes from how the work session is organised, not from changing the original context window. The announcement does not describe the summarization algorithm in detail, so the source does not yet say what information is kept or discarded when sessions are joined.
The model also thinks before answering by default, and its reasoning is separated from the final answer. For agent applications, this separation helps developers observe the decision-making process while debugging, while also requiring integration code to read the correct reasoning field instead of assuming everything sits in a single answer.
Price and Availability
The checkpoints have been available since the announcement date, November 18, 2026, under the Apache 2.0 licence, in three formats: BF16, FP8 and NVFP4. The announcement states no hosted API price or separate commercial package; the source has also not published third-party inference costs. Practical deployment information is in the model card, which lists model properties and inference settings, and in the SGLang cookbook, which provides launch configurations for different GPUs and checkpoint formats. Having three formats from the start lets deployment teams choose a build that fits their available hardware instead of waiting for a later conversion.
Who Should Try It
The first group that should try it is teams building or evaluating agents for terminal and coding work, because DeepSWE, SWE-Bench Pro and Terminal-Bench form the most fully published test group for this checkpoint. The second group is post-training researchers who want to test the fewer-but-carefully-designed-tasks approach: they should run DaisyRose-27B and the base model on the same internal task set before concluding that similar efficiency will transfer to their own domain. If the need is only short question-and-answer, the release's distinctive advantage — multi-step work over a long period — will be hard to see.
To run it, RadixArk recommends serving the model with SGLang combined with DSpark speculative decoding. After starting the server with the served model name DaisyRose-27B on port 30000, send a request using the OpenAI Python client with temperature 1.0, top_p 0.95, top_k 20 and min_p 0.0:
from openai import OpenAI
client = OpenAI(
base_url="http://localhost:30000/v1",
api_key="none",
)
response = client.chat.completions.create(
model="DaisyRose-27B",
messages=[{"role": "user", "content": "How many positive divisors does 360 have?"}],
temperature=1.0,
top_p=0.95,
extra_body={"top_k": 20, "min_p": 0.0},
)
print(response.choices[0].message.reasoning_content)
print(response.choices[0].message.content)
Read the result in two separate fields: reasoning_content contains the reasoning, while content contains the final answer. Skipping the first field when debugging means losing the process the model produced before reaching its conclusion.
Nguồn tham chiếuSource: Hugging Face Blog


